Mini excavators can save more fuel by doing so

Anyone who often uses a mini excavator knows that besides the maintenance of the machine, burning oil accounts for a large part of the daily work cost, which is also a problem that everyone pays more attention to. After all, it involves "money". Let's talk about it briefly.

First of all, when loading, the mini excavator should be in a higher position as far as possible, and the truck should be parked at the same height as the working surface as far as possible. If it is consistent with the previous height, it can improve the working efficiency by 40%.

Second, when the bucket cylinder and the connecting rod, the head rod cylinder and the head rod are all at 90 degrees, each cylinder has greater power to push the excavator.

Third, when excavating the natural ground, keep the floor angle of the bucket or scarifier at about 30, and close the bucket rod. When the arm is close to vertical, the arm force is larger and it can bear more loads.

Fourth, when digging at the beginning, don't extend the stick to a larger range of action, and the effect will be better from about 80%. (When the action range of the stick is large, the digging force of the stick is mini, so it is difficult to dig). Generally, novices should pay more attention to this.

Fifth, the digging range of the stick: the angle of the stick from 45 far to 30 inside. There is a slight difference due to the excavation depth, but the boom and bucket should be operated within this range, and should not be operated to the end of the stroke of the cylinder.